|
Post by Ryan Verthein on Oct 28, 2008 14:46:25 GMT -6
Put the parts in liquid Drain cleaner and let sit for as long as cleaner bottle says.
Fine sand the scratches with I'm thinking 1000 grit or so. (I don't know for sure, I'm stealing the basic steps from Richard again)
Polish with "Brasso" or similar product.
Take off polish residue (not sure what you might use here, maybe just warm water and a LITTLE dish soap.
Spray with acrylic clear coating made for plastic parts (bumpers, bike fairings, etc..)
|
|